This site is part of various affiliate programs, and as such, this article contains links that give us a small compensation for any purchases you make, at no additional cost to you. Please read the disclaimer policy for full details.
If you don’t have time to read the article, then out of the Canon PIXMA Pro 10 vs 100, the best printer is Canon Pro-100 for fast printing and value for money, or the Canon Pro-10 for archival quality prints and natural colors.
Comparing the Canon Pro 10 vs Pro 100 can be tricky as they at first seem to be such similar printers, but there are a couple of key differences between them.
This article quickly covers the similarities and differences between the Pro 100 vs Pro 10 in a short Canon Pixma Pro-100 review and Canon Pixma Pro-10 review, based on extensive research and practical knowledge of these printers.
Canon Pixma Pro 10 vs Pro 100
The key points of the Pixma Pro 10 vs 100 are listed below, along with the a fuller discussion of the main differences between them.
Well-regarded by hobbyists
- Dye based inks are better for glossy paper and for saturated colors
- Very fast print speed – a couple of minutes for a high quality 8×10
- Max print width of 13-inches
- Good value for money when refurbished
- Plenty of third-party ink available
- Prints can fade over time – particularly in the reds
Better for long lasting prints
- Pigment based inks given excellent fade resistance and print longevity
- Excellent black and white print quality thanks to the matte black and photo black
- Natural color saturation on all media
- Max print width of 13-inches
- Discontinued, but can still be cheap second-hand
- Expensive and less good value for money
Read More about the Upgraded Canon Printers, the Canon Pro-200 and Canon Pro-1000 in the article on the best photo printers.
Comparison Table of the Canon Pro 10 vs Pro 100
|Differences between the Pro 10 vs Pro 100|
|Number of Inks||
|Max. Print Width||
|Color Print Output||
|Black and White Print Output||
|Paper Type Handling||
What are the Key Differences Between the Canon Pro 100 vs Pro 10?
You can see from the comparison table of the Canon Pro 100 vs Pro 10 above, that there are not a large number of differences between the two models of printer.
For me, the only two key differences are the type and number of inks that the printers use (and of course the overall cost of the printer), and the print speed.
The Canon Pro-100 has eight dye based inks in total: Black, Magenta, Photo Magenta, Cyan, Photo Cyan, Yellow, Gray & Light Gray.
The Canon Pro-10 has ten pigment based inks in total: Matte Black, Photo Black, Magenta, Photo Magenta, Cyan, Photo Cyan, Yellow, Gray, Red & Chroma Optimizer.
Dye vs Pigment Inks
Comparing the Pixma Pro 10 vs Pixma Pro 100 through printing test images is mainly about comparing dye vs pigment inks. In the past, it used to that pigment inks were far superior to dye inks, but this is less the case nowadays.
Pigment inks offer generally better longevity and fade resistance, with Canon claiming the inks in the Pro-10 can last up to 80 years behind glass, with the dye inks of the Pro-100 only lasting 40 years.
Therefore, if archival print quality is an issue, the Pro-10 should be your go-to printer.
But, dye inks, like those in the Pro-100, can actually offer better color saturation and quality, albeit at the expense of a slightly shorter life.
This means that unless you are concentrating on black and white work, the Pro-100 should offer prints with better colors than the Pro-10.
In terms of cost per print, both models are fairly similar, although ink is slightly cheaper in the Pro-100, due to two fewer inks being needed. There is a good article on the Pixma Pro 100 cost per print in real world use here.
Remember that both models should be left switched on permanently, as they regularly run a maintenance cycle to prevent clogging of the print head. This involves the print head moving off its seal to push some ink into the maintenance cart, usually once every few days. If you switch your printer off, the head may clog if left unused for too long.
Bear in mind though that this will drain your ink supply, meaning that the small difference in ink cost can make a larger difference long term.
The other major difference is the print speed variability. The Canon Pro-100 is remarkably fast, shooting out an 8×10 print in only around two and a half minutes for a print at the maximum quality level.
By contrast, the Pro-10 takes over seven minutes to print the same image.
This difference might not seem like much, but if you are making several prints in quick succession, the time saving of the Pro-100 can quickly add up. This is particularly useful if you are making several prints a day.
Final Thoughts: Is the Canon Pro 10 or Pro 100 Better?
It’s very difficult to say which of the Canon Pro 10 or Pro 100 is better, as they are obviously designed for different uses.
The Canon Pro-10 suits those looking for an archival quality printer, with prints that do not fade quickly in direct sunlight, or those who are specializing in black and white work.
The Canon Pro-100 suits those who want superior color saturation and a printer that produces prints quickly, even if the prints are slightly more liable to fade over time.
They both offer excellent print quality, and neither will be a bad choice, although it is also worth checking out the newer Canon Pro-200, for dye based printing, and the Canon Pro-1000 for pigment based printing, in my article on photo printers.